This is an old revision of the document!


Electricity in Physics

Electrical energy is the movement of electrons between objects. As electrons are a form of matter, they are held by the law of conservation of matter and cannot be created nor destroyed. So, one can add and remove electrons between objects to transfer electrons.

If an atom has an imbalance of charge1), the atom is a charged atom. All items wish to be neutral. Typically, this means an electrical equilibrium if true neutrality is not possible.

Opposite charges attract, and like charges repel. Remember than an electron's symbol is $e^-$, it has a negative charge, so removing electrons make an object positively charged, and adding electrons make an object negatively charged.

Ground

A ground is an electrical connection to the earth2)3). It acts as an easy path for excess or lacking electrons to transfer in and out of the system to neutralize.

Types of Objects

Objects are typically in a spectrum between conductor and insulator. Conductors transfer electrons well, while insulators resist electron movement.

  • Conductors hold onto electrons weakly
  • Insulators hold onto electrons strongly

Good conductors are typically metals, while good insulators are typically plastics, rubber, or other nonmetals like air. For the purposes of physics, you can ignore the fact that there is a spectrum and treat all objects as black or white conductors or insulators.

Contacting Charged Objects

When two objects with different charges contact, a transfer of electrons will occur.

Object 1 Object 2 Resultant Charge
Positive Positive Positive4)
Negative Negative Negative5)
Positive Negative ??6)
Positive Neutral Positive7)
Negative Neutral Negative
Neutral Neutral Neutral

This form of electrical transfer is called “Charging by Conduction”.

Contacting Neutral Insulators with a Charged Object

As insulators tend to avoid electron transfer, only the polarity of the neutral object is changed upon contact. This is true for a positive or negative charge. With a polarity change, the electrons in the object rearrange to satisfy the rule that opposite charges attract and negative charges repel. Charges of either object does not change!

Charging by Induction

A charged object can affect the polarity of surrounding objects even without direct contact, think of it as similar to the above section. If a ground is connected to an object polarized by a nearby charged object, electrons will transfer in/out between the ground and the polarized object as a result of the electron attraction from the charged object. If the ground is then disconnected before the charged object is moved away, the electrons in the polarized object will remain, thus charging the object8). This is induction charging, and it works with both positively or negatively charged objects.

Charged Object Polarized Object Resultant Charge of Polarized Object
Positive Electrons will rush into the polarized object from ground as they are attracted to the nearby charged object Negative
Negative Electrons will rush out of the polarized object into ground as they are repelled by the nearby charged object Positive
1)
more or less electrons than protons
2)
quite literally, usually its a giant metal rod that is driven into the earth for most buildings
3)
btw, the ground plug is the third cylindrical prong in a standard 3 prong US plug
4)
the two objects will equalize the magnitude of their positive charges and enter equilibrium
5)
same as above
6)
depends on the magnitude of each, if they are exactly the same it will be neutral, but typically both will be the charge of the object with higher initial magnitude
7)
think of the charges as trying to average out, you won't get a negative when taking an average of a positive number and zero in math, right?
8)
if the charged object was moved before the disconnect of ground, the electrons will transfer back to retain neutrality, so nothing would happen

Navigation

bruh

QR Code
QR Code physics:electricity (generated for current page)